Wiring Question

[eleighj]

I have a question on our 2008 19' International. In the front under the left seat is the white water tank, pump and what appears to be the bus/ground bar for the wiring. In addition there are two gray wires that are either RJ11 or RJ45 with connectors that are each labeled as "Inverter". Exactly what are these wires for as neither one plugged in at this time? If they are for an inverter; can it be installed in the same area?

If someone could let me know it would be great. Thanks.

eleighj

[wa3vez]

I believe they are used too couple two signals to and from an Inverter/Charger unit as follows:

1. Temperature sensor that goes from the battery ground terminal to the charger to adjust charger output voltages.

2. Signals to be used with a remote monitor panel that provides battery voltage and current being drawn.

These are usually RJ-11 and the wires could indeed be used for any other unit.

This is my best guess.

Howard